Weatherproof and temperature hardened, Aruba 560 Series Outdoor Access Points (APs), R4W43A deliver cost-effective Wi-Fi 6 wireless connectivity in outdoor and environmentally challenging locations.
Quick Specs
Figure 1 shows the appearance of R4W43A.
Table 1 shows the Quick Specs.
Product Code |
R4W43A |
Dimensions |
16.5 cm (W) x 16.5 cm (D) x 11 cm (H) 6.5” (W) x 6.5” (D) x 4.3” (H) |
Maximum (worst-case) power consumption |
15.6W |
Maximum (worst case) power consumption in idle mode |
4.2W |
Maximum (worst case) power consumption in deep-sleep mode |
1.7 |
Power over Ethernet (PoE+) |
802.3at-compliant |
Operating temperature |
-40° C to +55° C (-40° F to +140° F) with full solar loading |
Operating humidity |
5% to 95% non-condensing internal |
Product Details
Figure 2 shows the front panel of R4W43A.
Note:
① |
Common outdoor Access Point mount, share common mounting rail for simplified outdoor access point installation. |
② |
1G PoE Ethernet ports with Intelligent Power Monitoring, 1Gbps Ethernet with included IP66/67 gland. |
Figure 3 shows the back panel of R4W43A.
Note:
① |
Entry-level dual-band Wi-Fi 6, 11ax radio supports dual-band 2*2 |
② |
Integrated IoT radio, IoT radio supports 802.15.4/Zigbee and BLE |
R4W43A provides these features:
- Incredible Efficiency
The 560 Series access points (APs) are designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients.
- Aruba Air Slice for Extended OFDMA Assurance
Initially, APs in controller-less mode (Instant) can provide SLA-grade performance by allocating radio resources, such as time, frequency, and spatial streams, to specific traffic types. By combining Aruba’s Policy Enforcement Firewall (PEF) and Layer 7 deep packet inspection (DPI) to identify user roles and applications, the APs will dynamically allocate the bandwidth needed.
- Multi-User MIMO (MU-MIMO)
560 Series APs support downlink MU-MIMO just like Wi-Fi 5 (802.11ac Wave 2) APs. The added benefit is the ability to multiply the number of clients that can now send traffic, thus optimizing client-to-AP spatial stream diversity.
- Aruba Advanced Cellular Coexistence (ACC)
The ACC feature uses built-in filtering to automatically minimize the impact of interference from cellular networks, distributed antenna systems (DAS), and commercial small cell or femtocell equipment.
- Intelligent Power Monitoring (IPM)
Aruba APs continuously monitor and report hardware energy consumption. They can also be configured to enable or disable capabilities based on available PoE power – ideal when wired switches have exhausted their power budget.
- Target Wake Time (TWT)
Ideal for IoTs that communicate infrequently, TWT establishes a schedule for when clients need to communicate with an AP. This helps improve client power savings and reduces airtime contention with other clients.
Compare to Similar Items
Table 2 shows the comparison of R4W43A.
Module |
R4W43A |
R4W39A |
Maximum (worst-case) power consumption |
15.6W |
PoE powered (dual ports): 32.0W PoE powered (single port, full function): 26.1W |
Maximum (worst case) power consumption in idle mode |
4.2W |
14.0W (single PoE) or 16.0W (dual PoE) |
Maximum (worst case) power consumption in deep-sleep mode |
1.7W |
2.9W (single PoE) or 3.9W (dual PoE) |
Dimensions |
16.5 cm (W) x 16.5 cm (D) x 11 cm (H) 6.5” (W) x 6.5” (D) x 4.3” (H) |
230mm (W) x 220mm (D) x 140mm (H) / 9.0″ (W) x 8.7″ (D) x 5.6″ (H) |
Operating temperature |
-40° C to +55° C (-40° F to +140° F) with full solar loading |
-40°C to +65°C / -40°F to +149°F with full solar loading |
Operating humidity |
5% to 95% non-condensing internal |
5% to 93% non-condensing internal |
Get More Information
Do you have any question about the R4W43A?
Contact us now via Contact Form or sales@northlandusa.com.