The Cisco 2951 router, supporting voice module, is designed for small offices.
Quick Specs
Figure 1 shows the appearance of the CISCO2951/k9.
Table 1 shows the Quick Specs of the CISCO2951/k9.
|
Product Code |
CISCO2951/k9 |
|
Rack Units |
2U |
|
Interfaces |
3 integrated 10/100/1000 Ethernet ports with 1 port capable of RJ-45 or SFP connectivity |
|
Expansion Slot(s) |
2 service module slot 1 Internal Service Module slot 3 onboard digital signal processor slots 4 Enhanced high-speed WAN interface card (EHWIC) slots |
|
RAM |
512 MB (installed) / 2 GB (max) – DDR2 SDDRAM Memory |
|
Flash Memory |
256 MB (installed) / 8 GB (max) |
|
Dimensions |
47 cm x 43.8 cm x 8.9 cm |
|
Package Weight |
17.82 Kg |
Product Details
Figure 2 shows the front panel of the Cisco 2951 router.
Note:
① AC OK ② On/Off switch ③ AC power connector ④ Optional RPS adapter(blank panel shown) ⑤ LEDs area
Table 2 shows the LEDs area description.
|
LED |
Color |
Description |
|
SYS |
Solid green |
Solid green indicates normal operation. |
|
Blinking green |
System is booting or is in ROM monitor mode. |
|
|
Amber |
System error. |
|
|
Off |
Power is off or system board is faulty. |
|
|
ACT |
Green |
Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port. |
|
Off |
No packet transfers are occurring. |
|
|
PoE |
Green |
PoE is available. |
|
Amber |
Power supply is not supplying PoE power. |
|
|
RPS |
Green |
System is running on external RPS power supply. |
|
PS |
Green |
System is running. |
|
Amber |
System is not running. |
Figure 3 shows some LEDs on the back panel of the Cisco 2951 router.
Note:
① Compact flash 0 and 1 (0, right) ② ISM ③ PVDM3 0,1 and 2 (0 right) ④ EN (Enable USB console) ⑤ EN (Enable RJ-45 console) ⑥ SFP S ⑦ SFP EN ⑧ S (Speed) ⑨ L (Link)
Table 3 shows the description of these LEDs on the back panel.
|
LED |
Color |
Description |
Location |
|
CompactFlash 1 |
Green |
Flash memory is busy. |
Back Panel |
|
Amber |
Initialized with error. |
||
|
Blinking Green then turns off |
CompactFlash is ready for removal. |
||
|
CompactFlash 0 |
Green |
Flash memory is busy. |
Back Panel |
|
Amber |
Initialized with error. |
||
|
Blinking Green then turns off |
CompactFlash is ready for removal. |
||
|
S (Speed) |
1 blink + pause |
GE port operating at 10Mb/s. |
Back Panel |
|
2 blink + pause |
GE port operating at 100Mb/s. |
||
|
3 blink + pause |
GE port operating at 1000 Mb/s. |
||
|
L (Link) |
Green |
GE link is established. |
Back Panel |
|
Off |
No GE link is established. |
||
|
EN (RJ-45 console port) |
Green |
The RJ-45 console port is active. |
Back Panel |
|
EN (USB serial console port) |
Green |
The USB console port is active. |
Back Panel |
|
ISM |
Green |
Initialized. |
Back Panel |
|
Amber |
Initialized with error. |
||
|
Off |
Not installed. |
||
|
SFP S |
Blinking green |
Blinking frequency indicates port speed. |
Back Panel |
|
SFP EN |
Off |
Not present. |
Back Panel |
|
Green |
Present and enabled. |
||
|
Amber |
Present with failure. |
||
|
PVDM 0, 1 and 2 |
Green |
PVDM is initialized. |
Back Panel |
|
Amber |
PVDM is detected but not initialized. |
||
|
Off |
No PVDM installed. |
Figure 4 show the expansion slots and ports on the back panel.
The Cisco 2951/K9 supports expansion functions with modules and cards.
Note:
① Compact flash 0 and 1 (0, right) ② EHWIC 0,1,2 and 3 (0, far right) ③ USB serial port ④ RJ-45 serial console port ⑤ AUX port ⑥ AUX port
⑦ 10/100/1000 Ethernet port (GE 0/1 and GE 0/2) ⑧ 10/100/1000 Ethernet port GE 0/0 ⑨ Ground ⑩ USB 0 and 1 (1, top) ⑪ Service module slots
Figure 5 show the unboxing view of CISCO2951/K9.
Modules & Licenses
Table 4 shows some recommended models for this router.
|
Models |
Description |
|
SM-ES3G-16-P |
Enhanced EtherSwitch Service Module, L2/L3 switching, 16* 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology |
|
SM-ES3G-24-P |
Enhanced EtherSwitch Service Module, L2/L3 switching, 24 * 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology |
|
VWIC3-2MFT-G703 |
Cisco Voice/WAN Card VWIC3-2MFT-G703 |
|
HWIC-2T |
2-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card |
|
EHWIC-1GE-SFP-CU |
Cisco 1900, 2900, 3900 Router EHWIC WAN Card EHWIC-1GE-SFP-CU |
|
EHWIC-4ESG |
Four port 10/100/1000 Base-TX Gigabit Ethernet switch interface card for Cisco 1900 2900 3900 Routers |
|
ISM-SRE-300-K9 |
Internal Services Module (ISM) with Services Ready Engine |
|
PVDM3-16 |
16-channel high-density voice DSP module |
|
MEM-CF-256U1GB |
256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900 |
|
MEM-CF-256U2GB |
256MB to 2GB Compact Flash Upgrade for Cisco 1900,2900,3900 |
|
MEM-CF-256U512MB |
256MB to 512MB CF Upgrade for Cisco 1900,2900,3900 ISR |
|
MEM-CF-256U4GB |
256MB to 4GB Compact Flash Upgrade for Cisco 1900,2900,3900 |
|
MEMUSB-1024FT |
1GB USB Flash Token |
|
Licenses |
Description |
|
L-SL-29-SEC-K9= |
Cisco 2900 License L-SL-29-SEC-K9 Security E-Delivery PAK for Cisco 2901-2951 |
|
L-SL-29-APP-K9= |
Cisco Application Experience License ISR 2900 Series – includes licenses for: AppX, DATA and WAASX |
|
L-SL-29-SECNPE-K9= |
Cisco 2900 License L-SL-29-SECNPE-K9 SEC No Payload Encryption E PAK for Cisco 2901-2951 |
|
L-SL-29-UC-K9= |
Cisco 2900 License L-SL-29-UC-K9= Unified Communication E-Delivery PAK for Cisco 2901-2951 |
Get more information
Do you have any question about the Cisco 2951 router?
Contact us now via Contact Form or sales@northlandusa.com.
