🔥 Get better ROI with discounts on hardware of 40-80%

Get A Quote!

800-409-3132

AIR-AP1810W-Z-K9 – Cisco Aironet 1810W Access Point

$150.30

802.11ac Wave 2 Access Point, 2×2:2, 3 GbE, Z Regulatory Domain

Purchase protection:

vega-trust

Payments:

payments
10 People watching this product now!
Share:

AIR-AP1810W-Z-K9, providing Z Regulatory Domain, is one of the Cisco Aironet 1810W (Wall Plate) Series Access Points. Cisco Aironet 1810W Series Access Points offer a compact, wall plate–mountable access point, ideal for hospitality, cruise ships, residential halls or other multi-dwelling-unit deployments. The Aironet 1810W Series combines Gigabit Ethernet wired and 802.11ac Wave 2 wireless connectivity into a sleek device, built to take advantage of existing cabling infrastructure. This combination reduces total cost of ownership with no compromise to the end user.

Quick Specs

Table 1 shows the quick specs of AIR-AP1810W-Z-K9.

Product Code

AIR-AP1810W-Z-K9

Interfaces

– 1 × 10/100/1000BASE-T PoE uplink port

– 1 × Management console port (RJ-45)

– 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port

– 1 × passive pass-through port RJ-45 (back to bottom)

– 1 × DC power connector

Features

2×2 single-user/multiuser MIMO with two spatial streams

Maximal ratio combining (MRC)

20-, 40- and 80-MHz channels

PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)

Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)

802.11 Dynamic Frequency Selection (DFS)

Cyclic shift diversity (CSD) support

Regulatory Domain

Z (Z regulatory domain):

– 2.412 to 2.462 GHz; 11 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

– 5.745 to 5.825 GHz; 5 channels

System

– 512 MB DRAM

– 256 MB flash

– 1.4 GHz system dual-core CPU

Dimensions (W x L x H)

165 x 114 x 41 mm (Access point without mounting bracket))

Weight

560g (Access point without mounting bracket or any other accessories)

Product Details

Figure 1 shows the 360° appearance of the AIR-AP1810W.

Figure 2 shows the face and left side of AP.

Note:

The Face of AP

48V DC power port

The Left side of AP

Kensington lock slot

Figure 3 shows the base of the AP with the ports and connectors.

Note:

Console port

LAN port 2

Passive Pass-Through port

PSE / LAN port 1

LAN port 3

· PSE / LAN port 1 provides 802.3af/at Power Sourcing Equipment (PSE) PoE-Out power on the LAN 1 Ethernet interface. With 802.3at input the PoE-Out is 6.95W (Class 2).With DC input the PoE-Out is 12.95W (Class 0).

Table 2. Cisco Aironet 1810W series access points can be mounted directly on the wall, to numerous global wall junction standards, or on a desk.

Type of Mounting

Mounting Bracket or Kit to be Used

Wall-mount installation on a single gang junction box or multiple international standards.

AIR-AP-BRACKET-W2

This bracket is shipped with the access point as standard. A spare can also be ordered from Cisco.

Wall-mount installation directly on wall, where standard junction boxes are not available.

AIR-AP1810W-KIT= spacer kit

This is kit includes an RJ-45 jumper cable and is separately available from Cisco.

Table-mount installation.

See Figure 4.

AIR-OEAP1810-CRD= cradle kit

This is kit includes a back cover, RJ-45 jumper cable and is separately available from Cisco.

☆ AIR-AP1810W includes a Wall Mounting bracket ( AIR-AP-BRACKET-W2) and has a number of Accessory options which are sold separately and can be ordered as spares.

Figure 4. Table-mount installation.

Note:

The AP

AIR-OEAP1810-CRD= cradle kit

Mounting the AP in the Cradle

· Cisco Aironet AP1810W series access points can be mounted on a table or horizontal surface, using the AIR-OEAP1810-CRD= cradle kit. This kit is shipped with the access point as standard and includes a back cover and an RJ-45 jumper cable. It is also separately available from Cisco as a spare.

Compare to Similar Items

Table 3 shows the comparison between two AP.

Models

AIR-OEAP1810-Z-K9

AIR-AP1810W-Z-K9

Special Feature

OfficeExtend

N/A

Interfaces

– 1 × 10/100/1000BASE-T PoE uplink port

– 1 × Management console port (RJ-45)

– 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port

– 1 × DC power connector

– 1 × 10/100/1000BASE-T PoE uplink port

– 1 × Management console port (RJ-45)

– 3 × 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port

– 1 × passive pass-through port RJ-45 (back to bottom)

– 1 × DC power connector

Regulatory Domain

Z (Z regulatory domain):

– 2.412 to 2.462 GHz; 11 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

– 5.745 to 5.825 GHz; 5 channels

Z (Z regulatory domain):

– 2.412 to 2.462 GHz; 11 channels

– 5.180 to 5.320 GHz; 8 channels

– 5.500 to 5.700 GHz; 8 channels

(excludes 5.600 to 5.640 GHz)

– 5.745 to 5.825 GHz; 5 channels

Get more information

Do you have any question about the AIR-AP1810W-Z-K9?

Contact us now via Contact Form or sales@northlandusa.com.

100% Low Price Guarantee

Northland provides high-quality products at low wholesale prices

Free CCIE Technical Support:

Our FREE Cisco CCIE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.

Flexible Secure Payment & Shipment:

Verified authorization: Mcafee Secure, VeriSign Secured

100% Quality Assurance:

All items are ORIGINAL and GENUINE only. Item conditions are "New Sealed" or "Used / Refurbished". Used & refurbished items are fully tested with good conditions by Cisco-certified Engineers.

100% Money Back Guarantee:

You can contact our customer service team to exchange or return any product that you bought from us.

Shopping cart
Product Categories
Follow:

AIR-AP1810W-Z-K9 – Cisco Aironet 1810W Access Point

Rated 0 out of 5